Parts Of A Microscope And Their Functions Pdf

File Name: parts of a microscope and their functions .zip
Size: 2493Kb
Published: 18.04.2021

Microscope , instrument that produces enlarged images of small objects, allowing the observer an exceedingly close view of minute structures at a scale convenient for examination and analysis. Although optical microscopes are the subject of this article, an image may also be enlarged by many other wave forms, including acoustic , X-ray , or electron beam , and be received by direct or digital imaging or by a combination of these methods. The microscope may provide a dynamic image as with conventional optical instruments or one that is static as with conventional scanning electron microscopes.

Before exploring the parts of a compound microscope , you should probably understand that the compound light microscope is more complicated than just a microscope with more than one lens. First, the purpose of a microscope is to magnify a small object or to magnify the fine details of a larger object in order to examine minute specimens that cannot be seen by the naked eye. Eyepiece: The lens the viewer looks through to see the specimen. The eyepiece usually contains a 10X or 15X power lens.

Optical microscope

The optical microscope , also referred to as a light microscope , is a type of microscope that commonly uses visible light and a system of lenses to generate magnified images of small objects. Optical microscopes are the oldest design of microscope and were possibly invented in their present compound form in the 17th century. Basic optical microscopes can be very simple, although many complex designs aim to improve resolution and sample contrast. The object is placed on a stage and may be directly viewed through one or two eyepieces on the microscope.

In high-power microscopes, both eyepieces typically show the same image, but with a stereo microscope , slightly different images are used to create a 3-D effect. A camera is typically used to capture the image micrograph. The sample can be lit in a variety of ways. Transparent objects can be lit from below and solid objects can be lit with light coming through bright field or around dark field the objective lens.

Polarised light may be used to determine crystal orientation of metallic objects. Phase-contrast imaging can be used to increase image contrast by highlighting small details of differing refractive index.

A range of objective lenses with different magnification are usually provided mounted on a turret, allowing them to be rotated into place and providing an ability to zoom-in. The maximum magnification power of optical microscopes is typically limited to around x because of the limited resolving power of visible light. Modified environments such as the use of oil or ultraviolet light can increase the magnification.

Alternatives to optical microscopy which do not use visible light include scanning electron microscopy and transmission electron microscopy and scanning probe microscopy and as a result, can achieve much greater magnifications. There are two basic types of optical microscopes: simple microscopes and compound microscopes.

A simple microscope uses the optical power of single lens or group of lenses for magnification. A compound microscope uses a system of lenses one set enlarging the image produced by another to achieve much higher magnification of an object.

The vast majority of modern research microscopes are compound microscopes while some cheaper commercial digital microscopes are simple single lens microscopes. Compound microscopes can be further divided into a variety of other types of microscopes which differ in their optical configurations, cost, and intended purposes.

A simple microscope uses a lens or set of lenses to enlarge an object through angular magnification alone, giving the viewer an erect enlarged virtual image. A compound microscope uses a lens close to the object being viewed to collect light called the objective lens which focuses a real image of the object inside the microscope image 1.

That image is then magnified by a second lens or group of lenses called the eyepiece that gives the viewer an enlarged inverted virtual image of the object image 2. Common compound microscopes often feature exchangeable objective lenses, allowing the user to quickly adjust the magnification. There are many variants of the compound optical microscope design for specialized purposes.

Some of these are physical design differences allowing specialization for certain purposes:. A digital microscope is a microscope equipped with a digital camera allowing observation of a sample via a computer. Microscopes can also be partly or wholly computer-controlled with various levels of automation. Digital microscopy allows greater analysis of a microscope image, for example, measurements of distances and areas and quantitation of a fluorescent or histological stain.

Low-powered digital microscopes, USB microscopes , are also commercially available. These are essentially webcams with a high-powered macro lens and generally do not use transillumination. The camera attached directly to the USB port of a computer so that the images are shown directly on the monitor. High power illumination is usually provided by an LED source or sources adjacent to the camera lens. Digital microscopy with very low light levels to avoid damage to vulnerable biological samples is available using sensitive photon-counting digital cameras.

It has been demonstrated that a light source providing pairs of entangled photons may minimize the risk of damage to the most light-sensitive samples. In this application of ghost imaging to photon-sparse microscopy, the sample is illuminated with infrared photons, each of which is spatially correlated with an entangled partner in the visible band for efficient imaging by a photon-counting camera. The earliest microscopes were single lens magnifying glasses with limited magnification which date at least as far back as the widespread use of lenses in eyeglasses in the 13th century.

Compound microscopes first appeared in Europe around [9] [10] including one demonstrated by Cornelis Drebbel in London around and one exhibited in Rome in The actual inventor of the compound microscope is unknown although many claims have been made over the years. Johannes' some claim dubious [14] [15] [16] testimony pushes the invention date so far back that Zacharias would have been a child at the time, leading to speculation that, for Johannes' claim to be true, the compound microscope would have to have been invented by Johannes' grandfather, Hans Martens.

Galileo Galilei is also sometimes cited as a compound microscope inventor. Christiaan Huygens , another Dutchman, developed a simple 2-lens ocular system in the late 17th century that was achromatically corrected, and therefore a huge step forward in microscope development. The Huygens ocular is still being produced to this day, but suffers from a small field size, and other minor disadvantages.

Antonie van Leeuwenhoek — is credited with bringing the microscope to the attention of biologists, even though simple magnifying lenses were already being produced in the 16th century.

Van Leeuwenhoek's home-made microscopes were simple microscopes, with a single very small, yet strong lens. They were awkward in use, but enabled van Leeuwenhoek to see detailed images. It took about years of optical development before the compound microscope was able to provide the same quality image as van Leeuwenhoek's simple microscopes, due to difficulties in configuring multiple lenses. In the s, John Leonard Riddell , Professor of Chemistry at Tulane University , invented the first practical binocular microscope while carrying out one of the earliest and most extensive American microscopic investigations of cholera.

While basic microscope technology and optics have been available for over years it is much more recently that techniques in sample illumination were developed to generate the high quality images seen today. This method of sample illumination gives rise to extremely even lighting and overcomes many limitations of older techniques of sample illumination. The Nobel Prize in physics was awarded to Dutch physicist Frits Zernike in for his development of phase contrast illumination which allows imaging of transparent samples.

By using interference rather than absorption of light, extremely transparent samples, such as live mammalian cells, can be imaged without having to use staining techniques. Just two years later, in , Georges Nomarski published the theory for differential interference contrast microscopy, another interference -based imaging technique.

Modern biological microscopy depends heavily on the development of fluorescent probes for specific structures within a cell. In contrast to normal transilluminated light microscopy, in fluorescence microscopy the sample is illuminated through the objective lens with a narrow set of wavelengths of light. This light interacts with fluorophores in the sample which then emit light of a longer wavelength.

It is this emitted light which makes up the image. Since the midth century chemical fluorescent stains, such as DAPI which binds to DNA , have been used to label specific structures within the cell. More recent developments include immunofluorescence , which uses fluorescently labelled antibodies to recognise specific proteins within a sample, and fluorescent proteins like GFP which a live cell can express making it fluorescent.

All modern optical microscopes designed for viewing samples by transmitted light share the same basic components of the light path. In addition, the vast majority of microscopes have the same 'structural' components [27] numbered below according to the image on the right :. The eyepiece , or ocular lens, is a cylinder containing two or more lenses; its function is to bring the image into focus for the eye.

The eyepiece is inserted into the top end of the body tube. Eyepieces are interchangeable and many different eyepieces can be inserted with different degrees of magnification. In some high performance microscopes, the optical configuration of the objective lens and eyepiece are matched to give the best possible optical performance. This occurs most commonly with apochromatic objectives.

Objective turret, revolver, or revolving nose piece is the part that holds the set of objective lenses. It allows the user to switch between objective lenses. At the lower end of a typical compound optical microscope, there are one or more objective lenses that collect light from the sample.

The objective is usually in a cylinder housing containing a glass single or multi-element compound lens. Typically there will be around three objective lenses screwed into a circular nose piece which may be rotated to select the required objective lens.

These arrangements are designed to be parfocal , which means that when one changes from one lens to another on a microscope, the sample stays in focus. Microscope objectives are characterized by two parameters, namely, magnification and numerical aperture.

Objective lenses with higher magnifications normally have a higher numerical aperture and a shorter depth of field in the resulting image.

Some high performance objective lenses may require matched eyepieces to deliver the best optical performance.

Some microscopes make use of oil-immersion objectives or water-immersion objectives for greater resolution at high magnification. These are used with index-matching material such as immersion oil or water and a matched cover slip between the objective lens and the sample.

The refractive index of the index-matching material is higher than air allowing the objective lens to have a larger numerical aperture greater than 1 so that the light is transmitted from the specimen to the outer face of the objective lens with minimal refraction.

Numerical apertures as high as 1. Adjustment knobs move the stage up and down with separate adjustment for coarse and fine focusing. The same controls enable the microscope to adjust to specimens of different thickness.

In older designs of microscopes, the focus adjustment wheels move the microscope tube up or down relative to the stand and had a fixed stage. The whole of the optical assembly is traditionally attached to a rigid arm, which in turn is attached to a robust U-shaped foot to provide the necessary rigidity. The arm angle may be adjustable to allow the viewing angle to be adjusted. The frame provides a mounting point for various microscope controls. Normally this will include controls for focusing, typically a large knurled wheel to adjust coarse focus, together with a smaller knurled wheel to control fine focus.

The stage is a platform below the objective lens which supports the specimen being viewed. In the center of the stage is a hole through which light passes to illuminate the specimen.

If a microscope did not originally have a mechanical stage it may be possible to add one. All stages move up and down for focus. With a mechanical stage slides move on two horizontal axes for positioning the specimen to examine specimen details.

Focusing starts at lower magnification in order to center the specimen by the user on the stage. Moving to a higher magnification requires the stage to be moved higher vertically for re-focus at the higher magnification and may also require slight horizontal specimen position adjustment.

Horizontal specimen position adjustments are the reason for having a mechanical stage. Due to the difficulty in preparing specimens and mounting them on slides, for children it's best to begin with prepared slides that are centered and focus easily regardless of the focus level used.

Many sources of light can be used. At its simplest, daylight is directed via a mirror. Most microscopes, however, have their own adjustable and controllable light source — often a halogen lamp , although illumination using LEDs and lasers are becoming a more common provision. The condenser is a lens designed to focus light from the illumination source onto the sample.

For illumination techniques like dark field , phase contrast and differential interference contrast microscopy additional optical components must be precisely aligned in the light path.

Parts of the Microscope and Their Uses

Though modern microscopes can be high-tech, microscopes have existed for centuries — this brass optical microscope dates to , and was made in Munich, Germany. A microscope is an instrument that is used to magnify small objects. Some microscopes can even be used to observe an object at the cellular level, allowing scientists to see the shape of a cell , its nucleus, mitochondria , and other organelles. While the modern microscope has many parts, the most important pieces are its lenses. A simple light microscope manipulates how light enters the eye using a convex lens , where both sides of the lens are curved outwards.

Before exploring the parts of a compound microscope , you should probably understand that the compound light microscope is more complicated than just a microscope with more than one lens. First, the purpose of a microscope is to magnify a small object or to magnify the fine details of a larger object in order to examine minute specimens that cannot be seen by the naked eye. Eyepiece: The lens the viewer looks through to see the specimen. The eyepiece usually contains a 10X or 15X power lens. Diopter Adjustment: Useful as a means to change focus on one eyepiece so as to correct for any difference in vision between your two eyes. Body tube Head : The body tube connects the eyepiece to the objective lenses. Arm: The arm connects the body tube to the base of the microscope.


A SIMPLE MICROSCOPE. The following are the parts of microscope: Eyepiece or ocular lens: Eyepiece is the.


Microscope Parts & Specifications

Before exploring the parts of a compound microscope , you should probably understand that the compound light microscope is more complicated than just a microscope with more than one lens. First, the purpose of a microscope is to magnify a small object or to magnify the fine details of a larger object in order to examine minute specimens that cannot be seen by the naked eye. Eyepiece: The lens the viewer looks through to see the specimen.

Before exploring the parts of a compound microscope , you should probably understand that the compound light microscope is more complicated than just a microscope with more than one lens. First, the purpose of a microscope is to magnify a small object or to magnify the fine details of a larger object in order to examine minute specimens that cannot be seen by the naked eye. Eyepiece: The lens the viewer looks through to see the specimen.

The functional parts of the microscope

One of the wonders of the scientific world is that so much of what goes on is invisible to the naked eye. Invented in by a Dutch optician named Zacharias Janssen, the compound or light microscope gives students and scientists a close-up view of tiny structures like cells and bacteria. Read on to find out more about microscope parts and how to use them. The eyepiece contains the ocular lens, which the user looks through to see the magnified specimen. The ocular lens has a magnification that can range from 5x to 30x, but 10x or 15x is the most common setting. The eyepiece tube connects the eyepiece and ocular lens to the objective lenses located near the microscope stage.

Microscope , instrument that produces enlarged images of small objects, allowing the observer an exceedingly close view of minute structures at a scale convenient for examination and analysis. Although optical microscopes are the subject of this article, an image may also be enlarged by many other wave forms, including acoustic , X-ray , or electron beam , and be received by direct or digital imaging or by a combination of these methods. The microscope may provide a dynamic image as with conventional optical instruments or one that is static as with conventional scanning electron microscopes. A microscope is an instrument that makes an enlarged image of a small object, thus revealing details too small to be seen by the unaided eye. The most familiar kind of microscope is the optical microscope, which uses visible light focused through lenses. It is not definitively known who invented the microscope.


Before purchasing or using a microscope, it is important to know the functions of each part. Eyepiece Lens: the lens at the top that you look through. They are.


Historians credit the invention of the compound microscope to the Dutch spectacle maker, Zacharias Janssen, around the year The compound microscope uses lenses and light to enlarge the image and is also called an optical or light microscope vs. The simplest optical microscope is the magnifying glass and is good to about ten times 10X magnification. Basic parts of the microscope:. They are usually 10X or 15X power.

The main components of light microscopes are: eyepiece, lens tube, objective revolver, stage, table, condenser, fine focus, coarse focus, luminous-field diaphragm, light source, base. An eyepiece is that part of an optical system, which is directed to the viewer. It is a construction of at least one or more lenses.

The optical microscope , also referred to as a light microscope , is a type of microscope that commonly uses visible light and a system of lenses to generate magnified images of small objects. Optical microscopes are the oldest design of microscope and were possibly invented in their present compound form in the 17th century. Basic optical microscopes can be very simple, although many complex designs aim to improve resolution and sample contrast. The object is placed on a stage and may be directly viewed through one or two eyepieces on the microscope. In high-power microscopes, both eyepieces typically show the same image, but with a stereo microscope , slightly different images are used to create a 3-D effect.

Related Posts

3 Response
  1. Thandspecokex

    The performance of your microscope optics directly affects the final quality of your products.

  2. Maya B.

    Historians credit the invention of the compound microscope to the Dutch spectacle maker, Zacharias Janssen, around the year more history here.

Leave a Reply